Rail transfer trolley play an important role in industrial material handling. For transporting tank load, you can choose an electric transfer cart with customized U-frame table. When transporting tank loads, we need to pay attention to placement, explosion-proofing, and stability. In the following, I will give you a detailed introduction.

Since tank cargo has a large tonnage, it is more appropriate to choose rail electric transfer cart, which is also more stable when transporting cargo. Low voltage rail transfer cart connects 36V two-phase AC power to two rails respectively. There is no cable limitations, transfer trolley can always get electricity on the track. Rail powered transfer trolley has high requirements for track laying and require insulation treatment. Fences are welded on both sides of the table to prevent cargo from rolling.

Specific Requirements of Rail Electric Trolley for Track Laying

1. When we lay the track, we need to insulate the track, wipe asphalt on the bottom of the track, then pad 5mm insulating rubber sheet, and add asphalt sand on both sides of the track. In addition, it should be noted that the resistance between the two tracks should not be less than 10 ohms.
2. For the connection of the same rail, track to track, it is recommended to use welding connection to ensure good contact.
3. The voltage on the rail shall not exceed 42V, and the voltage at the end of the line shall not be less than 30V if there is no compensation line.
4. In addition, since heavy duty transfer cart is powered by rail, there must not be any metal objects between the rails that touch the two rails at the same time to avoid short circuits.
5. A single step-down transformer is connected to the track, and the operating distance of electric transfer trolley is generally 70 meters. If the operating distance is longer, the number of transformers should be increased and a multi-point power supply method should be selected. The power supply transformer should be connected to the same PowerPoint, and the number of transformers should generally not exceed three.

Operation Procedures of Rail Transfer Trolley

1. Before entering the workshop, the staff must wear labor protection articles and protective equipment, otherwise, they cannot enter the production line.
2. Before using rail powered electric trolley, it is necessary to check whether transfer cart is intact and whether the transmission device and its lubrication are normal. Clear the production waste or large obstacles accumulated on both sides and in the middle of the track. As well as items that may affect the normal use of electric carts. The staff should give a use signal before rail transfer cart starts.
3. During the operation of electric rail transfer trolley, emergency start, and emergency braking should be prevented to avoid accidents caused by the inertial load sliding.
4. In the operation process, two people must work at the same time, one person operates rail electric trolley, and the other pays attention to the tank loads in the transfer trolley and the surrounding situation, reminds the passing staff to pay attention, contact the operator in time, and take corresponding measures to avoid accidents that hurt others or themselves.

25 Ton Rail Transfer Cart Video

Rail guided electric trolley has intelligent obstacle avoidance function, which can improve the safety and efficiency of handling operations, and ensure that timely measures can be taken to avoid accidents in emergencies. Rail transfer cart is easy to operate and runs smoothly, making it a good helper for transporting materials.